K160N

Termal Inkjet Tecnology 2.5

kodykar-tij-25-k160n

10 REASONS

1. No filter change required
2. Low cost printer
3. Small size
4. Easy use and messages creation
5. No maintenance required
6. No expendable parts
7. High resolution printing
8. Inks without hazardous solvent
9. Multi-material printing
10. High profitability printer

HIGH SPEED PRINTING

Up to 120m/min 300dpi

_

EASY TO USE

7″ touchscreen with intuitive
interface for easy configuration

K160 Printer Set

1/2 inch – 12,7 mm or 3 Inch – 76,2 mm printing according to the modular printer configuration with one controller and one, two, three, four, five or six printheads.
Independent product detection by printhead or by printhead block includes:
7 inch touch screen controller with one, two, three, four, five or six printheads separated or joined by umbilical  by 1.8 Meter umbilical
Mounting brackets for controller and printheads
30 V. Power supply
Cylindrical direct reflection photocell with connector and 2 M. cable .Depending on the configuration of the printer, up to 6 photocells can be installed, one per printhead
LAN + Full connectivity with multiple systems
Packaging: 52 x 28 x 23 cm Weight: 5.500 Kg Plastic case
Define power cable and cable for battery charger:
American Type A or European Type E

FAST AND EASY HIGH RESOLUTION PRINTER

HEAD PRINTING

D1 Configuration x 2 individual printheads
Height per printhead 1/2 Inch – 12.7 mm
D1 Configuration x 3 individual printheads
Height per printhead 1/2 Inch – 12.7 mm
D1 Configuration x 4 individual printheads
Height per printhead 1/2 Inch – 12.7 mm
D1 Configuration x 5 individual printheads
Height per printhead 1/2 Inch – 12.7 mm
D1 Configuration x 6 individual printheads
Height per printhead 1/2 Inch – 12.7 mm
D2U Configuration  1 double joined printhead with an overall height of 1 inch – 25.4mm
D3U Configuration  1 triple joined printhead with an overall height of 1.5 inch – 38.10mm
D4U Configuration 1 quadruple bonded printhead with an overall height of 2 inches –  50.8mm
D5U Configuration 1 quintuple bonded printhead with an overall height of 2.5 inches – 63.5mm
D6U Configuration 1 sextuple bonded printhead with an overall height of 3 inches – 76.2mm